TRA2973 8amp AC Fast Charger Manual

EZ-PEAK LIVE DUAL

•

MAXX Charge allows you to charge high capacity batteries at a faster charge rate

using the charger’s full power. Use this feature to charge your LiPo batteries at a

“2C” charge rate (up to 16 amps) (2C is 2 times the capacity; 4000 mAh x 2 = 8000

mAh or 8-amp charge rate). Charging priority is given to the right charger output

port once the MAXX Charge button is pressed;

the left charger output port remains active, but

will charge the connected battery at a decreased

charge rate.

Press the

MAXX Charge button. The button will

ﬂash for 3 seconds, and then turn solid green

to indicate MAXX Charge is active.

Follow the

charging steps for Traxxas iD LiPo batteries.

Refer to the chart on page 9 to review the maximum

charge current for each channel when using MAXX

Charge. The MAXX Charge setting manages the

current to each channel to allow maximum available

charge current to flow to each channel. For example,

as the battery on the MAXX Charge channel nears

completion and requires less charge current, the

remaining available charge current is automatically

sent to the left channel (up to the maximum

allowable iD charge current).

Charging Traxxas iD Batteries using MAXX Charge