TRA24054-4-BLUE Traxxas Bandit XL-5 Parts List
Page 3 Bandit: TQ 2.4GHz Radio (Model 24054-4) Parts List
REV. 190104 1045
6530 Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 4-
channel (transmitter only)
6537 Wire retainers, gear cover/ 3x4mm BCS (2)
3018R XL-5 Electronic Speed Control, waterproof (land version, low-voltage
detection, fwd/rev/brake)
Ready-To-Race Model
24054-4 Bandit: 1/10 Scale Off-Road Buggy with TQ 2.4GHz radio system
Rear Suspension
3638 Shock tower (rear)
3652 Stub axle carriers (2)
3752 Stub axle carriers (2) (requires 5x11x4mm bearings)
3652A Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
aluminum (blue-anodized)/ 5x11mm ball bearings (4)
3652G Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
aluminum (green-anodized)/ 5x11mm ball bearings (4)
3652P Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3652P Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3652X Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
aluminum (red-anodized)/ 5x11mm ball bearings (4)
2753X Stub axles, rear (2)
2750R Suspension arms, long (rear)
3640 Suspension screw pin set, steel (hex drive) (requires part #2640
for a complete suspension pin set) (Rustler, Stampede, Bandit)
Shocks (Aluminum)
1965 Piston head set, (2 sets of 3 types)/ shock collars (2)/ spring
retainers (2)
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws
(2)
2742X Rod ends, short (6)/ hollow balls (6)
2760 Shock caps, aluminum (2)
1664T Shock shafts, hardened steel, titanium nitride coated (long) (2)
2765T Shock shafts, hardened steel, titanium nitride coated (X-long) (2)
1664 Shock shafts, steel, chrome finish (long) (2)
2765 Shock shafts, steel, chrome finish (X-long) (2)
4760 Shocks, long (hard-anodized & PTFE-coated T6 aluminum) w/o
springs (front) (2)
4761 Shocks, X-long (hard-anodized & PTFE-coated T6 aluminum) w/o
springs (rear) (2)
1666 Silicone shock oil (30 wt)
Shocks (Pro-level Aluminum)
2664 Big Bore shock cylinder (long) (1)
2666 Big Bore shock cylinder (XX-long) (1)
5862 Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum)
(assembled with TiN shafts and springs) (front & rear) (4)
2660 Big Bore shocks (long) (hard-anodized & PTFE-coated T6
aluminum) (assembled with TiN shafts) w/o springs (front) (2)
2662 Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6
aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
2669 Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings
& washers (2) (Big Bore Shocks)
2362 Rebuild kit, Ultra shocks (for 2 shocks)
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws
(2)
2742X Rod ends, short (6)/ hollow balls (6)
2667 Shock caps, aluminum (Big Bore Shocks) (2)
1664T Shock shafts, hardened steel, titanium nitride coated (long) (2)
2656T Shock shafts, hardened steel, titanium nitride coated (xx-long)
(2)
1664 Shock shafts, steel, chrome finish (long) (2)
2765 Shock shafts, steel, chrome finish (X-long) (2)
1765 Silicone diaphragms (4)
1666 Silicone shock oil (30 wt)
2668 Spring retainers, upper & lower (2)/ spring pre-load spacers:
1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore
Shocks)
5860 Springs, front (white) (progressive rate) (2) (fits #5862 aluminum
Big Bore shocks)
5859 Springs, rear (white) (progressive rate) (2) (fits #5862 aluminum
Big Bore shocks)
Shocks (Ultra Shocks)
3642 Attachment screws, shock (3x12mm shoulder screws) (6)
3765A Body, Ultra Shock(s) (long) (grey) (2)
3766A Body, Ultra Shock(s) (XXL) (grey) (2)
2362 Rebuild kit, Ultra shocks (for 2 shocks)
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws
(2)
2742X Rod ends, short (6)/ hollow balls (6)
3767 Shock caps (2)/ shock bottoms (2)
8361 Shock caps (black) (4) (assembled with hollow balls)
3767A Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
3767G Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
3767P Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)
3767X Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
1664T Shock shafts, hardened steel, titanium nitride coated (long) (2)
2765T Shock shafts, hardened steel, titanium nitride coated (X-long) (2)
1664 Shock shafts, steel, chrome finish (long) (2)
2765 Shock shafts, steel, chrome finish (X-long) (2)
1765 Silicone diaphragms (4)
1666 Silicone shock oil (30 wt)
3769 Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
3768 Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole
(2))
2458 Springs, front (black) (2)
2458P Springs, front (pink) (2)
2458A Springs, front (white) (2)
2457 Springs, rear (black) (2)
2457P Springs, rear (pink) (2)
2457A Springs, rear (white) (2)
3760 Ultra Shocks (black) (long) (complete w/ spring pre-load spacers
& springs) (front) (2)
3762 Ultra Shocks (black) (xx-long) (complete w/ spring pre-load
spacers & springs) (rear) (2)
3760A Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers &
springs) (2)
3762A Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers &
springs) (rear) (2)
Slipper Clutch Components
3793 Input shaft (slipper shaft) / spring pin
5552X Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/
4.0mm NL (1)/ 5.0mm NL (1))
2554 Screws, 3x6mm cap-head machine (hex drive) (6)
5556 Slipper pressure plate & hub (aluminum alloy)
Spur Gears & Pinion Gears
3790 Gear adapter, fixed
2416 Gear, 16-T pinion (48-pitch) / set screw
1918 Gear, 18-T pinion (48-pitch) / set screw
2419 Gear, 19-T pinion (48-pitch) / set screw
2421 Gear, 21-T pinion (48-pitch) / set screw
2423 Gear, 23-T pinion (48-pitch) / set screw
2426 Gear, 26-T pinion (48-pitch)/set screw
2431 Gear, 31-T pinion (48-pitch) / set screw
4725 Gear, pinion (25-tooth) (48-pitch) / set screw
4676 Spur gear, 76-tooth (48-pitch) (for models with Torque-Control
slipper clutch)
4683 Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper
clutch)
4686 Spur gear, 86-tooth (48-pitch) (for models with Torque-Control
slipper clutch)
4690 Spur gear, 90-tooth (48-pitch) (for models with Torque-Control
slipper clutch)
Steering Components
2728 Ball bearings (5x8x2.5mm) (2)
5114 Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4)
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws
(2)
2742 Rod ends, long (6)/ hollow ball connectors (6)
5347 Rod ends, Revo (large) with hollow balls (12)
2742X Rod ends, short (6)/ hollow balls (6)
3744 Servo saver w/adapters
3742 Shoulder screws, steering bellcranks (3x30mm cap-head machine)
(2)/ draglink shoulder screws (chrome) (2)
3743 Steering bellcranks (l&r)/ draglink
3743A Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/
5x8mm ball bearings (4)/ hardware (assembled)
3743P Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/
5x8mm ball bearings (4)/ hardware (assembled)
3743X Steering bellcranks, drag link (red-anodized 6061-T6 aluminum)/
5x8mm ball bearings (4)/ hardware (assembled)
6845X Steering bellcranks/ servo saver/ servo saver spring/ servo
spring retainer/servo horn, steering
2537 Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
1937 Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber
links)
2445 Turnbuckles, toe link, 55mm (75mm center to center) (2)
(assembled with rod ends and hollow balls)