User Manual

Assembly Instructions

Have truck on level surface when

installing the Tailgate Ladder.

Attach Mounting Plate

Position mounting plate (A) on

preferred side of the tailgate, with

the studs with rocker arm channels

toward the side edge of the tail-

gate.

Mount at least 1” from the top of

the tailgate and at least ½” from

the side edge, depending on truck

model, so the ladder will clear

when tailgate is closed.

Drill six holes in optimal locations using #5 (9/64”) Drill

Bit.

Use 6 of the 20mm Sheet Metal Screws (H) for tailgates

without liner or with sprayed on liners. Use 6 of the 45mm

Sheet Metal Screws (I) for tailgates with drop-in bed

liners. Screw Mounting Plate to tailgate.

Attaching Side Tubes

Attach Side Tubes parts B and C onto

Rocker Arm channels. Set Offset

Tube (B) into the rocker arm channel

closest to the cab of the pickup and

set Straight Tube (C) into the rocker

arm channel away from the cab.

Attach both tubes with 4 x 35mm

Hex-head Bolt (I) and 4mm Lock Nut

(K).

NOTE: Only half of the holes in

the mounting plate will be used.

Based on model of truck/tail-

gate the screw hole locations

will vary. Optimum screw loca-

tions are the front and back

sides of mounting plate -

instead of the interior holes.