Product Manual

Assemble Base
Attach Casters
Assemble legs (M1 and M2)
to Base (N) using bolts (F),
Nuts (C) and Pins (I) as
shown. Do not overtighten.
The two legs must be
angled outward with
angle adjustment
notches on the inside.
NOTE
With angle adjustment notches
upward, secure two Locking
Casters (A2) to closed end of
the base (N) using Flange Nut
(B). Secure two non-locking
casters (A1) to the outward
protruding legs using Flange
Nuts (B) as shown.
Attach Climbing Section
Position step section (O) as shown.
Secure step section to base using two
Bolts (F) and two Locknuts (C).
Inside step section must be secured
before proceeding. Insert both spring
loaded pins into corresponding hole in
outside rail of Climbing Section (M).
Slide inside step section frame until
both spring loaded adjustment pins
fully engaged through oblong adjust-
ment holes of inside rails.
IMPORTANT