Instruction Manual

GSB/MV Basic Wall Mount Remote AC Adapter
SKU# 250-06096
Page 3 of 8 17602253 10/7/22 © Travis Industries, Inc.
Overview
This kit is added to the basic wall-mount remote kit to supply AC power to the remote receiver. The basic
installation is the same for MV and GSB stoves and inserts. This kit can also be used with MV and GSB
fireplaces but the way the kit connects to AC power is slightly different than with the inserts and stoves (see
fireplace installation section for details).
Fireplace, Insert, and Radiant Stove Installations
This set of installation instructions shows a summary of the remote installation.
For detailed instructions on the placement of the receiver and other details, refer to the
installation manual included with your appliance.
NOTE: If a blower is used you will not use the strain-relief
bracket that is included with this kit and can skip step one.
When a blower is used, the ground for the remote AC
adapter will connect to the blower rheostat housing and the
blower ground wire will be attached to the extra tab on the
AC adapter grounding quick connect.