Brochure

ManualsBrandsTrapzilla ManualsGrease TrapsGrease Interceptor, 2 x 18" Extension Collars, 4" Inlet/Outlet, 1,826 lbs Capacity (100 GPM)

29” Extension Collar Assemblies

Used with in-ground and in-oor installations. Aids in lining up facility

drainage piping when located deep in the ground. Compatible with

Standard Adapter Ring on Basic/Above-ground Models and 18-inch

Built-In Extension Collar on In-ground Models.

Trapzilla

Installation Options and Congurations

Its lightweight and compact design enables Trapzilla

to be installed in

places where standard grease interceptors would not fit or could not be

accommodated. Trapzilla

Options allow a variety of space saving, code

friendly, and creative installations.

Flow Splitters

Used when plumbing twin Trapzilla

units in parallel. Splits and diverts

kitchen ow into two separate, equal ows when two Trapzilla

units are

necessary. Four Trapzilla

units can be plumbed using three ow splitters.

Flow Splitters available for 4” models (MFSH-44) and 6” models (MFSH-66).

Hanging Assemblies

Used to support a Trapzilla

unit when installed between oors.

Includes Support Stand Assembly. Trapzilla

unit must be

purchased separately.

Use HA-70/95 for TSS-70/95 Models and HA-400/600 for

TZ-400/600 Units.

Support Stand Assemblies

Used to support the Trapzilla

unit when installed directly on the

oor of a basement or mechanical room.

FTCA Cover Plates

Provides a sturdier non-slip cover when a Trapzilla

unit is

installed directly in the oor or locations where the cover may be

in high foot-trac areas. Fabricated of durable aluminum with a

diamond plate surface.

TZ-600 installed between oors

using Hanging Assembly & FTCA-36

SSA-160

HA-400/600 for TZ units

SSOP-400/600

FTCA-36 with Brass Cleanout PortFTCA-22

SSOP-70/95

A Better Way to Sample

Municipal authorities around the world now require

facilities to install a sampling port to gather and test euent

wastewater. This includes a sample well or a separate chamber

downstream of the facility. In many cases, installation of a

conventional sample well is a signicant expense. Trapzilla

Sample Ports oer an aordable and accurate alternative to

those large sample wells.

Easy, Versatile Installation

Trapzilla

Sample Ports are designed for easy installation

and may be installed inside or outside the facility on the

wastewater drainage piping. An optional, eld-modiable

extension collar is available for installations where the

piping is deep in the ground. The Two-Piece Extension

Collar features a telescoping design, making it easier to cut

and set. The Sample Ports are small and lightweight and

can be easily carried through regular doorways and down

commercial facility staircases for basement installations.

Works with Any Interceptor

While Thermaco

recommends its use with Trapzilla

Grease Interceptors, a Trapzilla

Sample Port can be used

with any grease interceptor, or oil/water separator on a

4-inch line. Additionally it can be installed in facilities that

are not required to use interceptors but are still expected

to meet certain discharge standards (industrial processes,

commercial facilities).

Use with the Trapzilla

GrabSampler

™

for Easy Sampling

Thermaco

recommends the use of its GSA-1

GrabSampler

™

(sold separately), specically

designed to work with Trapzilla

Sample

Ports, for optimal results. The GrabSampler

™

is designed to nest in the TZSP-40 or TZSP-48

and has a simple, adjustable jar carrier that

can be used at any angle to gather samples.

Trapzilla

Sample Ports

TZSP-40

The TZSP-40 can be installed on existing lines using its

patented ume to narrow and accelerate incoming ows

allowing horizontal sample lling access despite the lack of

a substantial fall gradient. When sampling a TZSP-40, the

GrabSampler

™

lays nearly at in the sample port. The TZSP-

40 is also suitable for composite sampling applications.

TZSP-48

The TZSP-48 features an 8-inch fall to meet codes requiring

vertical waterfall lling access. When sampling a TZSP-48,

the GrabSampler

™

sits vertically in the sample port. The

ume narrows the ow path of incoming water, preventing

the build-up of sediment in the inlet and accelerating the

ow into the jar.

Sample Port Use and Operation

TZSP-48 TZSP-40TZSP-40-ECATZSP-48-ECA

ECA-TZ-29 ECA-TSS-29

1312

info@thermaco.com / www.trapzilla.com / 1-800-633-4204