Install Guide

This product is to be installed by qualified installation personnel only.

The installer must be trained in industry best practices for this type of

installation. The training would include but not be limited to:

1. The appropriate methods for installing cables such that:

• The operation of the vehicle is not interfered with.

• The installation process does not damage or interfere with other

vehicle components and/or systems.

• Wiring is kept clear of sharp objects, sources of heat and any

other hazard that could damage the cable or wire.

• Wiring is secured such that it does not cause damage to other equip-

ment, itself, or interfere with the operation of other systems and

devices.

• Wiring through bulkheads is performed such that wiring does not

chafe, and a seal is maintained between compartments.

• Appropriate and industry standard fasteners, splices, connectors

and ties are used for the vehicle environment.

• Appropriate slack is in place to prevent straining of the wire, cable

or connectors.

• Any other issue that could affect the integrity of the wiring or the

safe operation of the vehicle is addressed appropriately.

This product is to be installed by

qualified installation personnel only.

Incorrect installation may result in FIRE

or contribute to an ACCIDENT

WARNING

qualified insTaller