Install Guide

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

2) IEC 60950 3RD EDITION (2000) SAFETY OF INFORMATION

TECHNOLOGY EQUIPMENT

3) ISO 7637-1 LOAD DUMP TRANSIENT

Designed for ISO 7637-1 Load Dump Transient

4) MIL STD 810F: GENERAL VIBRATION

Tested to MIL-STD-810F Vibration Test Method 514.5 Procedure

I: General Vibration, Category 20 Ground Vehicles.

4.1) Highway Vehicle Endurance Testing

Each axis was exposed to 1 hour of vibration according to Figure

514.5C-1 U.S. Highway Truck Vibration Exposure Levels. This is

an accelerated fatigue test meant to test the unit’s life cycle. The

unit was functionally tested before and after the test.

5) MIL STD 810F: SHOCK TEST

Tested to MIL-STD-810F Shock Test Method 516.5 Procedure I:

Functional Shock. Functional Shock was performed on the verti-

cal, transverse, and longitudinal axes with a pulse of 40gs. The

tests were performed to ensure the unit stays intact during vehicle

operation.

6) IEC 60529 - IP54

Tested to IEC 60529 IP54 for protection against ingress of water

with harmful effects splashing. Unit must not be equipped with

magnetic card reader or taximeter.

appendix a - ConforMiTy