Install Guide

27
Groundplane style antennas are ideally mounted on the centre of a
metal vehicle roof.
Glass mount antennas should be mounted away from metal objects.
When using an adhesive antenna, it is extremely important to make
sure that the surface of the mounting location has been thoroughly
cleaned. Use Isopropyl alcohol to clean the surface just before
securing the adhesive pad.
3) CABLE ROUTING
The antenna cabling has a minimum inside bend radius of 2”. Bend-
ing the cable tighter will cause degradation in antenna performance.
Avoid routing the antenna cable in parallel with the vehicle wiring
over long distances.
Do not coil excess antenna cable slack.
anTennas
Antenna Routing
Figure 7