Install Guide

16
Torque Settings
There are a number of items that may need to be installed to a spe-
cific torque level. This includes the Main Cable Cover, Mounting Ball,
RF Cable Cover and antennas. The following Table lists the recom-
mended torque settings for installing these items. Over and under
torquing can lead to product damage and/or failure.
We recommend using a calibrated torque screwdriver for tightening
all screws. A Huber Suhner SMA torque wrench (74Z-0-0-21) is
recommended for tightening the Antenna cable.
Description Mentor Part Number
Recommended Torque
Oz.In N.cm
Main Cable Cover 3-ENC-RNGRP226-XX 80-90 55-65
Mounting Ball 6-MNT-RAMCMN3X-XX 80-90 55-65
RF Cable Cover 3-ENCRNGRP301-XX 80-90 55-65
R-SMA Antenna Cable 6-ANT-XXXXXXXX-XX 140 100
insTalling The ranger Cover plaTe