Install Guide

15
sTep 2a
insTalling The ranger Cover plaTe
Align the back cover
plate with the Ranger as
shown.
sTep 2b
If there are external cables con-
nected to the Ranger, ensure to
thread the cables through the
holes in the cover.
The cables must be threaded
in such a way that they are
not pinched by the cover when
fastened to the Ranger.
sTep 3
Secure the cover to the
Ranger with the screws
provided. This will require
6mm and 2mm hex head
screws (2 of each).