Install Guide

14
insTalling The ranger Cover plaTe
Ranger Back View
sTep 1
Ranger Back Cover Plate
Connect the Ranger power cable
to the power input as shown. Use
2mm screws and fasten cover. This
requires a 2mm Hex bit.
SUPPLIES REQUIRED TO INSTALL COVER
In order to install the Ranger Cover, the following items
will be used. Most items are included in your shipment of
Ranger equipment:
- Ranger Cover Plate
- 6mm hex head screw (Quantity 2)
- 2mm hex head screw (Quantity 2)
- Hex bit, for 2mm hex head screws
- 5/16” wrench (torque wrench preferred) **
**Not included