User's Manual

Ranger v4.4 Installation Guide
Sep
2017
TRADE SECRET. Trapeze Proprietary and Confidential.Copyright © 2017 Trapeze Software ULC, its subsidiaries and affiliates. All rights reserved.
28
of 42
13 Compliance and Testing
UL60950-1:2003 R7.06, CAN/CSA-C22.2 No. 60950-1-03 SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT
Certificate No. CU 72152397
ISO 7637-1 Load Dump Transient
Designed for ISO 7637-1 Load Dump Transient
MIL STD 810F: General Vibration
Tested to MIL-STD-810F Vibration Test Method 514.5 Procedure I: General Vibration, Category 20 Ground
Vehicles.
Highway Vehicle Endurance Testing
Each axis was exposed to 1 hour of vibration according to Figure 514.5C-1 U.S. Highway Truck Vibration Exposure
Levels. This is an accelerated fatigue test meant to test the unit’s life cycle. The unit was functionally tested
before and after the test.
MIL STD 810F: Shock Test
Tested to MIL-STD-810F Shock Test Method 516.5 Procedure I: Functional Shock. Functional Shock was performed
on the vertical, transverse, and longitudinal axes with a pulse of 40gs. The tests were performed to ensure the
unit stays intact during vehicle operation.
IEC 60529 - IP54
Tested to IEC 60529 IP54 for protection against ingress of water with harmful effects splashing. Excludes units
equipped with a magnetic card reader.
SAE J1455
Designed to meet SAE J1455 guidelines for instrument panel temperatures.