User's Manual

MultiConnectHardwareInstallationGuide 1_2.doc
April 8, 2004
Page 3 of 17
Suite 230, 2891 Sunridge Way NE, Calgary Alberta, T1Y 7K7
♦ Phone: [phone] ♦ Fax: [phone]
INTRODUCTION
This document provides instructions and guidelines that should be followed for the
successful installation of a Mentor MultiConnect.
1 Revision Tracking
Date Description Revision Initials
March 15, 2004 Initial Release 1.0 JK
March 31, 2004 Updated compliance to FCC Class B 1.1 JK
Added Canadian Compliance Statements
April 8, 2004 Added additional safety warning to FCC statements 1.2 JK
2 General Precautions
Before using this product, be sure to carefully read all operating instructions. Save
these instructions for future reference. Also be sure to heed all the warnings located
throughout this document.
NOTE
Mentor Engineering Inc. reserves the right to change specifications without notice.
Please ensure you have the most recent revision of this Document
CAUTION
Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or
any type of organic solvent to clean this product.
CAUTION
Only qualified, trained personnel should service the MultiConnect unit. Attempting to
remove the cover or disassemble the product could expose you to dangerous high
voltage points.