User's Manual

MultiConnectHardwareInstallationGuide 1_2.doc
April 8, 2004
Page 10 of 17
Suite 230, 2891 Sunridge Way NE, Calgary Alberta, T1Y 7K7
♦ Phone: [phone] ♦ Fax: [phone]
3 MultiConnect Connections
The cable cover on the MultiConnect unit can be removed by hand or by using a flathead
screwdriver to loosen the two screws. Removing the cable cover gives access to the
MultiConnect interface points, which are detailed below.
Figure 2: MultiConnect Interface points (Rear View)