Operation Manual

IP Services Commands
IP Services Commands
8 – 97
See Also
● clear ntp server on page 8-96
● set ntp on page 8-114
● set ntp server on page 8-114
● set ntp update-interval on page 8-115
● show ntp on page 8-140
clear snmp community
Clears an SNMP community string.
Syntax clear snmp community name community-name
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Examples The following command clears community string setswitch2:
MX# clear snmp community name setswitch2
success: change accepted.
See Also
● set snmp community on page 8-116
● show snmp community on page 8-141
clear snmp notify profile
Clears an SNMP notification profile.
Syntax clear snmp notify profile profile-name
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Examples The following command clears notification profile snmpprof_rfdetect:
MX# clear snmp notify profile snmpprof_rfdetect
success: change accepted.
community-name Name of the SNMP community you want to clear.
profile-name Name of the notification profile you are clearing.