Operation Manual

IP Services Commands
IP Services Commands
8 – 93
Syntax clear interface vlan-id ip
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Usage If the interface you want to remove is configured as the system IP address, removing the
address can interfere with system tasks using the system IP address, including the following:
● Mobility domain operations
● Topology reporting for dual-homed MPs
● Default source IP address used in unsolicited communications such as AAA accounting reports
and SNMP traps
Examples The following command removes the IP interface configured on VLAN mauve:
MX# clear interface mauve ip
success: cleared ip on vlan mauve
See Also
● set interface on page 8-102
● set interface status on page 8-106
● show interface on page 8-135
clear interface security
Clears default IP security operations.
Syntax clear interface vlanid ip security destination ipaddr
Defaults None
Access Enabled
History Added in MSS 7.1
Examples To clear 172.21.25.1 on the VLAN fast1 from the security destination, use the following
command:
MX# clear interface fast1 ip security destination 172.21.25.1
success: change accepted.
clear ip alias
Removes an alias, which is a string that represents an IP address.
Syntax clear ip alias name
vlan-id VLAN name or number.
vlanid The name of the VLAN to set security operations.
ipaddr
The IP address of the security destination
name Alias name.