Operation Manual

IP Services Commands 8 – 91
8
IP Services Commands
Use IP services commands to configure and manage IP interfaces, management services, the
Domain Name Service (DNS), Network Time Protocol (NTP), aliases, and to ping a host or trace a
route. This chapter presents IP services commands alphabetically. Use the following table to
locate commands in this chapter based on their use.
IP Interface set interface on page 8-102
set interface dhcp-client on page 8-103
New set interface security on page 8-105
set interface status on page 8-106
show interface on page 8-135
show dhcp-client on page 8-132
Updated clear interface on page 8-92
New clear interface security on page 8-93
System IP Address set system ip-address on page 8-129
clear system ip-address on page 8-99
IP Route set ip route on page 8-109
show ip route on page 8-138
Updated clear ip route on page 8-95
SSH Management set ip ssh server on page 8-112
set ip ssh on page 8-111
Telnet Management set ip telnet on page 8-112
set ip telnet server on page 8-113
show ip telnet on page 8-139
clear ip telnet on page 8-95
HTTPS Management set ip https server on page 8-109
set ip https authentication on page 8-108
show ip https on page 8-137
DNS set ip dns on page 8-107
set ip dns domain on page 8-107
set ip dns server on page 8-108
show ip dns on page 8-136
clear ip dns domain on page 8-94
clear ip dns server on page 8-94
IP Alias set ip alias on page 8-106
show ip alias on page 8-136
clear ip alias on page 8-93
Time and Date set timedate on page 8-130
set timezone on page 8-130
set summertime on page 8-128