Operation Manual

Quality of Service Commands
Mobility System Software Command Reference Guide
Version 7.3
7 – 88
Usage Used in VoIP configurations.
set qos-profile
Configures QoS parameters to apply to multiple clients.
Syntax set qos-profile profile-name [access-category background | best effort |
video | voice]|[cos static-cos-value][max-bandwidth max-bw-kb][use-client-dscp
enable | disable] trust-client-dscp [enable | disable]
Defaults None
Access Enabled
History Command introduced in MSS Version 6.2.
show qos
Displays the MX QoS settings.
Syntax show qos [default]
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.1.
Examples The following command displays the default QoS settings:
MX# show qos default
Ingress QoS Classification Map (dscp-to-cos)
profile-name
Name of the QoS profile
access-category
background
best-effort
video
voice
Four types of forwarding queues to configure QoS.
cos
static-cos-value
Mark QoS traffic with a specific CoS value from 0 to 7.
max-bandwidth
max-bw-kb
Configure the bandwidth for the QoS profile. You can configure it as 1 to
100000 Kbps with 0 as unlimited bandwidth.
trust-client-dscp
{enable|disable }
Allows the MX to use the client DSCP for radio ingress traffic and ignore WMM.
Version 6.2 Command introduced.
Version 7.1 The attribute trust-client-dscp added.
Version 7.3
The attribute
use-client-dscp is deprecated.
default Displays the default mappings.