Operation Manual
VLAN Commands
VLAN Commands
6 – 83
show vlan-profile
Displays the contents of the VLAN profiles configured on the MX. A VLAN profile lists the VLANs
that traffic is locally switched by MPs with the VLAN profile.
Syntax
show vlan-profile [profile-name]
Defaults
If a profile-name is not specified, the contents of all VLAN profiles configured on the MX
switch are displayed.
Access
All.
History
Introduced in MSS Version 6.0.
Examples
The following command displays the contents of VLAN profile locals:
MX# show vlan-profile locals
vlan-profile: locals
AP list: 1,2,3
Vlan Name Tag
--------- ---
blue none
red 45
ap numbers: 67
Table 6– 18 describes the fields in the show vlan-profile output.
See Also
● set ap local-switching vlan-profile on page 12-245
● clear vlan-profile on page 6-71
● set vlan-profile on page 6-75
profile-name VLAN profile name
Table 6– 18. Output for show vlan-profile
Field Description
vlan-profile Name of the VLAN profile.
Vlan Name Name of the VLAN for which local switching is performed.
Mode Value of the 802.1Q tag used for the VLAN.
ap numbers The index numbers of the APs where this VLAN profile is applied.