Operation Manual

VLAN Commands
VLAN Commands
6 – 79
User Name Station Address VLAN State
---------------------- ----------------- --------------- -----
redsqa 10.10.10.5 violet Up
Table 6– 13 describes the fields in the display.
See Also show roaming vlan on page 6-79
show roaming vlan
Shows all VLANs in the mobility domain, the MX switches servicing the VLANs, and the tunnel
affinity values configured on each MX for the VLANs.
Syntax show roaming vlan
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Examples The following command shows the current roaming VLANs:
MX# show roaming vlan
VLAN Switch IP Address Affinity
---------------- --------------- --------
vlan-cs 192.168.14.2 5
vlan-eng 192.168.14.4 5
vlan-fin 192.168.14.2 5
vlan-it 192.168.14.4 5
vlan-it 192.168.14.2 5
vlan-pm 192.168.14.2 5
vlan-sm 192.168.14.2 5
vlan-tp 192.168.14.4 5
vlan-tp 192.168.14.2 5
Table 6– 14 describes the fields in the display.
Table 6– 13. Output for show roaming station
Field Description
User Name Name of the user. This is the name used for authentication. The name resides in a RADIUS
server database or the local user database on an MX.
Station Address IP address of the user device.
VLAN Name of the VLAN that the RADIUS server or MX local user database assigned the user.
State State of the session:
❑ Setup—Station is attempting to roam to this MX. This switch has asked the MX from
which the station is roaming for the station session information and is waiting for a reply.
❑ Up—MSS has established a tunnel between the MX switches and the station has
successfully roamed to this MX over the tunnel.
❑ Chck—This MX is in the process of accepting a reassociation request from the roaming
peer MX for a station currently roaming to the peer switch.
❑ TChck—This MX is in the process of accepting a reassociation request from the roaming
peer MX for a station currently roaming to this switch.
❑ WInd—This MX is waiting for network congestion to clear before sending the roaming
indication to the roaming peer MX.
❑ WResp—This MX is waiting for network congestion to clear before sending the roaming
response to the roaming peer MX.