Operation Manual

Port Commands
Mobility System Software Command Reference Guide
Version 7.3
5 – 66
History Introduced in MSS Version 1.0.
Examples The following command displays information for all ports on a 22-port MX switch:
MX# show port status
Port Name Admin Oper Config Actual Type Media
===============================================================================
1 1 up up auto 100/full network 10/100BaseTx
2 2 up down auto network 10/100BaseTx
3 3 up down auto network 10/100BaseTx
4 4 up down auto network 10/100BaseTx
5 5 up down auto network 10/100BaseTx
6 6 up down auto network 10/100BaseTx
7 7 up down auto network 10/100BaseTx
8 8 up down auto network 10/100BaseTx
9 9 up up auto 100/full ap 10/100BaseTx
10 10 up up auto 100/full network 10/100BaseTx
11 11 up down auto network 10/100BaseTx
12 12 up down auto network 10/100BaseTx
13 13 up down auto network 10/100BaseTx
14 14 up down auto network 10/100BaseTx
15 15 up down auto network 10/100BaseTx
16 16 up down auto network 10/100BaseTx
17 17 up down auto network 10/100BaseTx
18 18 up down auto network 10/100BaseTx
19 19 up down auto network 10/100BaseTx
20 20 up down auto network 10/100BaseTx
21 21 up down auto network no connector
22 22 up down auto network no connector
Table 5– 10 describes the fields in this display.
Table 5– 10. Output for show port status
Field Description
Port Port number.
Name Port name. If the port does not have a name, the port number is listed.
Admin Administrative status of the port:
❑ up—The port is enabled.
❑ down—The port is disabled.
Oper Operational status of the port:
❑ up—The port is operational.
❑ down—The port is not operational.
Config Port speed configured on the port:
❑ 10—10 Mbps.
❑ 100—100 Mbps.
❑ 1000—1000 Mbps.
❑ auto—The port sets its own speed.
Actual Speed and operating mode in effect on the port.