Operation Manual

Port Commands
Port Commands
5 – 63
See Also
● clear port-group on page 5-45
● set port-group on page 5-54
show port media-type(deprecated)
Displays the enabled interface types on an MX-400 gigabit Ethernet ports.
Syntax show port media-type [port-list]
Defaults None.
Access All.
History Introduced in MSS Version 4.0.
Usage This command applies only to the MX-400.
Examples The following command displays the enabled interface types on all four ports of an
MX-400:
MX-400# show port media-type
Port Media Type
===========================================================
1 GBIC
2 RJ45
3 GBIC
4 GBIC
Table 5– 8 describes the fields in this display.
See Also
● clear port media-type (deprecated) on page 5-45
Table 5– 7. Output for show port-group
Field Description
Port group Name and state (enabled or disabled) of the port
group.
Ports Ports contained in the port group.
port-list List of physical ports. MSS displays the enabled interface types for all
specified ports.
Version 4.0 Command introduced.
Version 7.1 Command deprecated.
Table 5– 8. Output for show port media-type
Field Description
Port Port number.
Preference Preference setting:
❑ GBIC—The GBIC (fiber) interface is enabled.
❑ RJ45—The RJ-45 (copper) interface is enabled.