Operation Manual

Port Commands
Mobility System Software Command Reference Guide
Version 7.3
5 – 62
Defaults None.
Access All.
History Introduced in MSS Version 1.0.
Usage You can specify one statistic type with the command.
Examples The following command shows octet statistics for port 3:
MX> show port counters octets port 3
Port Status Rx Octets Tx Octets
=============================================================================
3 Up 27965420 34886544
This command’s output has the same fields as the monitor port counters command. For
descriptions of the fields, see Table 5– 5 on page 50.
See Also
● clear port counters on page 5-44
● monitor port counters on page 5-47
show port-group
Displays port group information.
Syntax show port-group [name group-name]
Defaults None.
Access All.
History
Examples
The following command displays the configuration of port group server2:
MX# show port-group name server2
Port group: server2 is up
Ports: 15, 17
Table 5– 7 describes the fields in the show port-group output.
receive-etherstats Displays Ethernet statistics for received packets.
transmit-etherstats Displays Ethernet statistics for transmitted packets.
port port-list List of physical ports. If you do not specify a port list, MSS displays
statistics for all ports.
name group-name Displays information for the specified port group.
Version 1.0 Command introduced.
Version 4.2 Option all removed for simplicity. You can display information for
all groups by entering the command without specifying a group
name.