Operation Manual

Boot Prompt Commands
Mobility System Software Command Reference Guide
Version 7.3
25 – 534
Trapeze Networks MX Bootstrap/Bootloader
Version 1.6.5 Release
Bootstrap 0 version: 1.17 Active
Bootloader 0 version: 1.6.5 Active
Bootstrap 1 version: 1.17
Bootloader 1 version: 1.6.3
MX Board Revision: 3.
MX Controller Revision: 24.
POE Board Revision: 1
POE Controller Revision: 6
BOOT Index: 0
BOOT TYPE: c
DEVICE: boot1:
FILENAME: default
FLAGS: 00000000
OPTIONS: run=nos;boot=0
See Also boot on page 25-526
show
Displays the currently active boot profile. A boot profile is a set of parameters that an MX uses to
control the boot process. Each boot profile contains the following parameters:
● Boot type—Either compact flash (local device on the MX) or network (TFTP)
● Boot device—Location of the system image file
● Filename—System image file
● Flags—Number representing the bit settings of boot flags to pass to the booted system image.
● Options—String up to 128 bytes of boot options to pass to the booted system image
An MX can have up to four boot profiles, numbered 0 through 3. Only one boot profile can be active
at a time. You can create, change, and delete boot profiles. You also can activate another boot
profile in place of the currently active one.
Syntax show
Defaults None.
Access Boot prompt.
History Introduced in MSS Version 1.0.
Examples To display the currently active boot profile, type the following command at the boot
prompt:
boot> show
BOOT Index: 0
BOOT TYPE: c
DEVICE: boot1:
FILENAME: default
FLAGS: 00000000
OPTIONS: run=nos;boot=0