Operation Manual

Boot Prompt Commands
Boot Prompt Commands
25 – 533
See Also help on page 25-531
next
Activates and displays the boot profile in the next boot profile slot. (For information about boot
profiles, see show on page 25-534.)
Syntax next
Defaults None.
Access Boot prompt.
History Introduced in MSS Version 1.0.
Usage An MX contains 4 boot profile slots, numbered 0 through 3. This command activates the
boot profile in the next slot, in ascending numerical order. If the currently active slot is 3, the
command activates the boot profile in slot 0.
Examples To activate the boot profile in the next slot and display the profile, type the following
command:
boot> next
BOOT Index: 0
BOOT TYPE: c
DEVICE: boot1:
FILENAME: testcfg
FLAGS: 00000000
OPTIONS: run=nos;boot=0
See Also
● change on page 25-527
● create on page 25-528
● delete on page 25-529
● show on page 25-534
reset
Resets an MX hardware.
Syntax reset
Defaults None.
Access Boot prompt.
History Introduced in MSS Version 1.0.
Usage After resetting the hardware, the reset command attempts to load a system image file only
if other boot settings are configured to do so.
Examples To immediately reset the system, type the following command at the boot prompt:
boot> reset
Trapeze Networks MX Bootstrap 1.17 Release
Testing Low Memory 1 ............
Testing Low Memory 2 ............
CISTPL_VERS_1: 4.1 <SanDisk> <SDP> <5/3 0.6>
Reset Cause (0x02) is COLD