Operation Manual
Boot Prompt Commands
Mobility System Software Command Reference Guide
Version 7.3
25 – 532
Syntax
help [command-name]
Defaults
None.
Access
Boot prompt.
History
Introduced in MSS Version 1.0.
Usage
If you specify a command name, detailed information is displayed for that command. If
you do not specify a command name, all the boot prompt commands are listed.
Examples
The following command displays detailed information for the fver command:
boot> help fver
fver Display the version of the specified device:filename.
USAGE: fver [c:file|d:file|e:file|f:file|boot0:file|boot1:file|boot2:file|boo
t3:file]
Command to display the version of the compressed image file
associated with the given device:filename.
See Also
ls on page 25-532
ls
Displays a list of the boot prompt commands.
Syntax
ls
Defaults
None.
Access
Boot prompt.
History
Introduced in MSS Version 1.0.
Usage
To display help for an individual command, type help followed by the command name (for
example, help boot).
Examples
To display a list of the commands available at the boot prompt, type the following
command:
boot> ls
ls Display a list of all commands and descriptions.
help Display help information for each command.
autoboot Display the state of, enable, or disable the autoboot option.
boot Load and execute an image using the current boot configuration profile.
change Change the current boot configuration profile.
create Create a new boot configuration profile.
delete Delete the current boot configuration profile.
next Select the next boot configuration profile.
show Display the current boot configuration profile.
dir Display the contents of the specified boot partition.
fver Display the version of the loadable image specified by device:filename.
version Display HW and Bootstrap/Bootloader version information.
reset Reset the system.
test Display the state of, enable, or disable the tests option.
diag Access the diagnostic command CLI.
command-name Boot prompt command.