Operation Manual

Boot Prompt Commands
Boot Prompt Commands
25 – 531
Usage To display the system image software versions, use the fver command. This command
does not list the boot code versions. To display the boot code versions, use the version command.
Examples The following command displays all the boot code and system image files on an MX
switch:
boot> dir
Internal Compact Flash Directory (Primary):
MX010101.020 5523634 bytes
BLOAD 696176 bytes
BSTRAP 38056 bytes
Internal Compact Flash Directory (Secondary):
MX010101.020 5524593 bytes
See Also
● fver on page 25-531
● version on page 25-536
fver
Displays the version of a system image file installed in a specific location on an MX.
Syntax fver {c: | d: | e: | f: | boot0: | boot1:} [filename]
Defaults None.
Access Boot prompt.
History Introduced in MSS Version 1.0.
Usage To display the image filenames, use the dir command. This command does not list the boot
code versions. To display the boot code versions, use the version command.
Examples The following command displays the system image version installed in boot partition 1:
boot> fver boot1
File boot1:default version is 1.1.0.98.
See Also
● dir on page 25-530
● version on page 25-536
help
Displays a list of all the boot prompt commands or detailed information for an individual
command.
c: Nonvolatile storage area containing boot partition 0 (primary).
d: Nonvolatile storage area containing boot partition 1 (secondary).
e: Primary partition of the flash card in the flash card slot.
f: Secondary partition of the flash card in the flash card slot.
boot0: Boot partition 0.
boot1: Boot partition 1.
[filename] System image filename.