Operation Manual

System Log Commands
System Log Commands
24 – 521
MX# show log buffer facility ?
<facility name> Select one of: KERNEL, AAA, SYSLOGD, ACL, APM, ARP, ASO, BOOT,
CLI, CLUSTER, CRYPTO, DOT1X, NET, ETHERNET, GATEWAY, HTTPD, IGMP, IP, MISC, NOSE, NP,
RAND, RESOLV, RIB, ROAM, ROGUE, SM, SNMPD, SPAN, STORE, SYS, TAGMGR, TBRIDGE, TCPSSL,
TELNET, TFTP, TLS, TUNNEL, VLAN, X509, XML, MP, RAPDA, WEBVIEW, EAP, FP, STAT, SSHD,
SUP, DNSD, CONFIG, BACKUP.
The following command displays logged messages for the AAA facility:
MX# show log buffer facility AAA
AAA Jun. 25 09:11:32.579848 ERROR AAA_NOTIFY_ERR: AAA got SM special event (98) on locality
3950 which is gone
See Also
● clear log on page 24-517
● show log config on page 24-521
show log config
Displays log configuration information.
Syntax show log config
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Examples To display how logging is configured, type the following command:
MX# show log config
Logging console: disabled
Logging console severity: DEBUG
Logging sessions: disabled
Logging sessions severity: INFO
Logging buffer: enabled
Logging buffer severity: WARNING
Logging trace: enabled
Logging trace severity: DEBUG
Logging buffer size: 10485760 bytes
Log marking: disabled
Log marking severity: NOTICE
Log marking interval: 300 seconds
Logging server: 172.21.12.19 port 514 severity EMERGENCY
Current session: disabled
Current session severity: INFO
See Also
● set log on page 24-518
● clear log on page 24-517
show log trace
Displays system information stored in the nonvolatile log buffer or the trace buffer.