Operation Manual

Snoop Commands

23 – 515

Usage

The MP retains statistics for a snoop filter until the filter is changed or disabled. The MP

then clears the statistics.

Examples

The following command shows statistics for snoop filter snoop1:

MX# show snoop stats snoop1

Filter AP Radio Rx Match Tx Match Dropped

===================================================================

snoop1 3 1 96 4 0

Table 23– 1 describes the fields in this display.

Table 23– 1. show snoop stats Output

Field Description

Filter Name of the snoop filter.

AP MP containing the radio that the filter is mapped.

Radio Radio to which the filter is mapped.

Rx Match Number of packets received by the radio that match the filter.

Tx Match Number of packets sent by the radio that match the filter.

Dropped Number of packets that matched the filter but that were not copied to the

observer due to memory or network problems.