Operation Manual

Snoop Commands
Mobility System Software Command Reference Guide
Version 7.3
23 – 514
MX# show snoop info
snoop1:
observer 10.10.30.2 snap-length 100
all packets
snoop2:
observer 10.10.30.3 snap-length 100
frame-type eq data
mac-pair (aa:bb:cc:dd:ee:ff, 11:22:33:44:55:66)
See Also
● clear snoop on page 23-509
● set snoop on page 23-510
show snoop map
Shows the MP radios mapped to a specific snoop filter.
Syntax show snoop map filter-name
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Usage To display the mappings for all snoop filters, use the show snoop command.
Examples The following command shows the mapping for snoop filter snoop1:
MX# show snoop map snoop1
filter 'snoop1' mapping
AP: 3 Radio: 2
See Also
● clear snoop map on page 23-509
● set snoop map on page 23-511
● show snoop on page 23-513
show snoop stats
Displays statistics for enabled snoop filters.
Examples show snoop stats [filter-name [ap-num [radio {1 | 2}]]
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
filter-name Name of the snoop filter.
filter-name Name of the snoop filter.
ap ap-num Number of an MP to which the snoop filter is mapped.
radio 1 Radio 1 of the MP.
radio 2 Radio 2 of the MP. (This option does not apply to single-radio models.)