Operation Manual

Snoop Commands
Snoop Commands
23 – 513
success: filter 'snoop1' enabled
See Also
● show snoop on page 23-513
● show snoop info on page 23-513
● show snoop map on page 23-514
● show snoop stats on page 23-514
show snoop
Displays the MP radio mapping for all snoop filters.
Syntax show snoop
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Usage To display the mappings for a specific MP radio, use the show snoop map command.
Examples The following command shows the MP radio mappings for all snoop filters configured on
an MX switch:
MX# show snoop
AP: 3 Radio: 2
snoop1
snoop2
AP: 2 Radio: 2
snoop2
See Also
● clear snoop map on page 23-509
● set snoop map on page 23-511
● show snoop map on page 23-514
show snoop info
Shows the configured snoop filters.
Syntax show snoop filter-name
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Examples The following command shows the snoop filters configured in the examples above:
filter-name Name of the snoop filter.