Operation Manual

File Management Commands
Mobility System Software Command Reference Guide
Version 7.3
21 – 502
See Also show boot on page 497
uninstall soda agent
Removes the contents of a directory containing SODA agent files.
Syntax uninstall soda agent agent-directory directory
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.2.
Usage Use this command to remove a SODA agent directory and all files in the specified
directory. The command removes the directory and the contents, even if it does not contain SODA
agent files.
Examples The following command removes the directory sp1 and all of the contents:
MX# uninstall soda agent agent-directory sp1
This will delete all files in agent-directory, do you wish to continue? (y|n) [n]y
See Also
● install soda agent on page 490
● set service-profile soda mode on page 308
Table 21– 3. Output for show version
Field Description
Build Information Factory timestamp of the image file.
Label Software version and build date.
Build Suffix Build suffix.
Model Build model.
Hardware Version information for the MX motherboard and Power over Ethernet (PoE)
board.
Serial number Serial number of the MX.
Flash Flash memory version.
Kernel Kernel version.
BootLoader Boot code version.
Port/AP Port number connected to an MP.
AP Model MP model number.
Serial # MP serial number.
Versions MP hardware, firmware, and software versions.
directory Directory on the MX where SODA agent files are to be removed.