Operation Manual

File Management Commands
File Management Commands
21 – 499
show config
Displays the configuration running on the MX.
Syntax show config [all | cluster | local] [area area]
Defaults None.
Access Enabled.
area area
Configuration area. You can specify one of the following:
❑ aaa
❑ acls
❑ ap
❑ ap-trace
❑ arp
❑ eapol
❑ httpd
❑ ip
❑ ip-config
❑ l2acl
❑ load-balancing
❑ log
❑ mobility-domain
❑ network-domain
❑ ntp
❑ port-group
❑ port config
❑ qos
❑ radio-profile
❑ rfdetect
❑ service-profile
❑ sm
❑ snmp
❑ snoop
❑ spantree
❑ system
❑ trace
❑ vlan
❑ vlan-fdb
❑ vlan-profile
If you do not specify a configuration area, nondefault
information for all areas is displayed.
cluster Displays only the cluster configuration on the MX.
local Displays only the local configuration on the MX.
all Includes configuration items set to the default values.