Operation Manual

RF Detection Commands
Mobility System Software Command Reference Guide
Version 7.3
20 – 482
See Also
● show rfdetect data on page 20-475
● show rfdetect mobility-domain on page 20-477
Flags Classification and encryption information for the rogue:
❑ The i, a, or u flag indicates the classification.
❑ The other flags indicate the encryption used by the
rogue.
For flag definitions, see the key in the command output.
SSID SSID used by the detected device.
Table 20– 8. show rfdetect visible Output (continued)
Field Description
Transmit MAC MAC address the rogue device that sent the 802.11
packet detected by the MP radio.
Vendor Company that manufactures or sells the rogue device.
Type Classification of the rogue device:
❑ rogue—Wireless device that is on the network but is
not supposed to be on the network.
❑ intfr—Wireless device not part of your network and
is not a rogue, but might be causing RF interference
with MP radios.
❑ known—Device that is a legitimate member of the
network.
Ch Channel number on which the radio detected the rogue.