Operation Manual

RF Detection Commands
RF Detection Commands
20 – 477
Syntax show rfdetect neighbor-list
Defaults None.
Access Enabled.
History Introduced in MSS Version 3.0.
Examples The following example displays the list of ignored devices:
MX# show rfdetect neighbor-list
Total number of entries: 2
Ignore MAC
-----------------
aa:bb:cc:11:22:33
aa:bb:cc:44:55:66
See Also
● clear rfdetect neighbor-list on page 20-463
● set rfdetect ignore on page 20-468
show rfdetect mobility-domain
Displays the rogues detected by all MX switches in the Mobility Domain during RF detection
scans.
Syntax show rfdetect mobility-domain
[ssid ssid-name | bssid mac-addr]
Defaults None.
Access Enabled.
History
Usage
This command is valid only on the seed MX of the Mobility Domain. To display rogue
information for an individual MX, use the show rfdetect data command on that MX.
Examples The following command displays summary information for all SSIDs and BSSIDs
detected in the Mobility Domain:
MSS Version 3.0 Command introduced.
MSS 6.2 Command changed from ignore to neighbor-list.
ssid ssid-name Displays rogues using the specified SSID.
bssid mac-addr Displays rogues using the specified BSSID.
Version 3.0 Command introduced.
Version 4.0
❑ bssid and ssid options added.
❑ Vendor, Type, and Flags fields added.