Operation Manual

RF Detection Commands
Mobility System Software Command Reference Guide
Version 7.3
20 – 474
MX# show rfdetect countermeasures
Total number of entries: 190
Rogue MAC Type Countermeasures MX-IPaddr Port/Radio
Radio Mac /Channel
----------------- ----- ------------------ --------------- -------------
00:0b:0e:00:71:c0 intfr 00:0b:0e:44:55:66 10.1.1.23 ap 4/1/6
00:0b:0e:03:00:80 rogue 00:0b:0e:11:22:33 10.1.1.23 ap 2/1/11
Table 20– 4 describes the fields in this display.
See Also set radio-profile countermeasures on page 12-268
show rfdetect counters
Displays statistics for rogue and Intrusion Detection System (IDS) activity detected by the MPs
managed by an MX.
Syntax show rfdetect counters
Defaults None.
Access Enabled.
History Introduced in MSS 4.0.
Examples The following command shows counters for rogue activity detected by an MX:
MX# show rfdetect counters
Type Current Total
-------------------------------------------------- ------------ ------------
Rogue access points 0 0
Interfering access points 139 1116
Rogue 802.11 clients 0 0
Interfering 802.11 clients 4 347
802.11 adhoc clients 0 1
Unknown 802.11 clients 20 965
Interfering 802.11 clients seen on wired network 0 0
802.11 probe request flood 0 0
802.11 authentication flood 0 0
802.11 null data flood 0 0
802.11 mgmt type 6 flood 0 0
Table 20– 4. show rfdetect countermeasures Output
Field Description
Rogue MAC BSSID of the rogue.
Type Classification of the rogue device:
❑ rogue—Wireless device that is on the network but is not supposed to be on
the network.
❑ intfr—Wireless device that is not part of your network and is not a rogue,
but might be causing RF interference with MP radios.
❑ known—Device that is a legitimate member of the network.
Countermeasures Radio
MAC
MAC address of the Trapeze radio sending countermeasures against the
rogue.
MX-IPaddr System IP address of the MX managing the MP that is sending or will send
countermeasures.
Port/Radio/Channel Port number, radio number, and channel number of the countermeasures
radio.