Operation Manual

RF Detection Commands
RF Detection Commands
20 – 471
show rfdetect rogue-list
Displays information about the MAC addresses in the rogue list.
Syntax show rfdetect rogue-list
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Examples The following example shows the rogue list on MX:
MX# show rfdetect rogue-list
Total number of entries: 1
Roguelist MAC Port/Radio/Chan RSSI SSID
----------------- ----------------- ------ ------------
11:22:33:44:55:66 ap 2/1/11 -53 rogue-ssid
See Also
● clear rfdetect rogue-list on page 20-462
● set rfdetect rogue-list on page 20-465
show rfdetect black-list
Displays information abut the clients in the client blacklist.
Syntax show rfdetect black-list
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Examples The following example shows the client blacklist on MX:
MX# show rfdetect black-list
Total number of entries: 1
Blacklist MAC Type Port TTL
----------------- ----------------- ------- ---
11:22:33:44:55:66 configured - -
11:23:34:45:56:67 assoc req flood 3 25
N If in the Neighbor List Neighbor
Y If SSID Masquerade Rogue
Y Client or Client DST MAC seen in network Rogue
Y If Ad hoc device Rogue
N If SSID in SSID list Neighbor
Y Default Classification Suspect
MSS Version 4.0 Command introduced.
MSS Version 6.2 Command changed from attack-list to rogue-list.