Operation Manual

Port Commands

5 – 53

Defaults

The default vales are the same as the defaults for the set port type ap command.

Access

Enabled.

History

Examples

The following command configures MP 1 for MP model MP-372 with serial-ID 0322199999:

MX# set ap 1 serial-id 0322199999 model mp-372

success: change accepted.

The following command removes MP 1:

MX# clear ap 1

This will clear specified AP devices. Would you like to continue? (y/n) [n]y

See Also

● clear ap on page 5-44

● clear port type on page 5-46

● set port type ap on page 5-59

● set system countrycode on page 4-30

Version 2.0 Command introduced

Version 2.1 New values for model option added:

❑ mp-52

❑ mp-262

Version 3.0 New values for model option added:

❑ AP2750

❑ mp-341

❑ mp-352

Version 3.2 New value for model option added: mp-372

Version 4.1 New values for model option added:

❑ 2330

❑ 2330A

❑ AP3750

❑ mp-372-CN

❑ mp-372-JP

❑ mp-620

Deprecated values for model option removed:

❑ mp-101

❑ mp122

Version 6.0 Changed dap to ap. Added MP-422 model and

MP-71.

Version 7.0 Added MP-371, MP-422A, MP-422F, MP-432,

MP-620A,

Removed MP-52, MP-252, MP-372-CN, MP-341,

and MP-352

Version 7.1 Added models MP-622, MP-632, and MP-82.

Version 7.3 Added models MP-522 and MP-522E