Operation Manual

RF Detection Commands
RF Detection Commands
20 – 463
clear rfdetect countermeasures mac
Deprecated in MSS Version 4.0.
clear rfdetect neighbor-list
Removes a device from the neighbor list for RF scans. MSS does not generate log messages or
traps for the devices in the neighbor list.
Syntax clear rfdetect neighbor-list [transmit-mac | oui | all]
Defaults None.
Access Enabled.
History
Examples
The following command removes BSSID aa:bb:cc:11:22:33 from the neighbor list for RF
scans:
MX-20# clear rfdetect neighbor-list aa:bb:cc:11:22:33
success: aa:bb:cc:11:22:33 is no longer on the neighbor-list.
See Also
● set rfdetect ignore on page 20-468
● show rfdetect neighbor-list on page 20-476
clear rfdetect ssid-list
Removes an SSID from the permitted SSID list.
Syntax clear rfdetect ssid-list ssid-name
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Examples The following command clears SSID mycorp from the permitted SSID list:
MX# clear rfdetect ssid-list mycorp
success: mycorp is no longer in ssid-list.
See Also
● set rfdetect ssid-list on page 20-469
transmit-mac Basic service set identifier (BSSID), which is a MAC address, of the device to remove
from the neighbor list.
oui A third-party device ID
all Removes all devices from the neighbor list.
MSS Version 3.0 Command introduced.
MSS Version 6.2 Changed ignore to neighbor-list.
ssid-name SSID name you want to remove from the permitted SSID list.