Operation Manual

RF Detection Commands
Mobility System Software Command Reference Guide
Version 7.3
20 – 462
clear rfdetect rogue-list
Removes a MAC address from the attack list.
Syntax clear rfdetect rogue-list [mac | all]
Defaults None.
Access Enabled.
History
Examples
The following command clears MAC address 11:22:33:44:55:66 from the rogue list:
MX# clear rfdetect attack-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer in roguelist.
See Also
● set rfdetect rogue-list on page 20-465
● show rfdetect rogue-list on page 20-471
clear rfdetect black-list
Removes a MAC address from the client blacklist.
Syntax clear rfdetect black-list [ mac | all]
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
Examples The following command removes MAC address 11:22:33:44:55:66 from the blacklist:
MX# clear rfdetect black-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer blacklisted.
See Also
● set rfdetect black-list on page 20-465
● show rfdetect black-list on page 20-471
Log Messages set rfdetect log on page 20-468
MX-to-Client RF Link rfping on page 20-464
mac MAC address you want to remove from the rogue list.
all Removes all MAC addresses from the rogue list.
MSS Version 4.0 Command introduced.
MSS Version 6.2 Input changed from attack-list to rogue-list
mac-addr MAC address you want to remove from the blacklist.