Operation Manual

Session Management Commands
Mobility System Software Command Reference Guide
Version 7.3
19 – 460
See Also clear sessions network on page 19-450
show sessions network sip
Displays information about SIP sessions on the network.
Syntax show sessions network sip [statistics | verbose | voice-details]
Defaults None
Access Enabled
History Added in MSS 7.1
Tag System-wide supported VLAN tag type.
Session Start Indicates when the session started.
Last Auth Time Indicates when the most recent authentication of the session occurred.
Last Activity Indicates when the last activity (transmission) occurred on the session.
Session Timeout Assigned session timeout in seconds.
Idle Time-To-Live Number of seconds the session can remain idle before MSS changes the session state to
Disassociated.
Login Type Authentication type used to log onto the network:
❑ DOT1X
❑ MAC
❑ LAST-RESORT
❑ WEB-PORTAL
EAP Method Extensible Authentication Protocol (EAP) type used to authenticate the session user, and
the IP address of the authentication server.
Session statistics as
updated from AP
Time the session statistics were last updated from the MP access point, in seconds since a
fixed standard date and time.
Unicast packets in Total number of unicast packets received from the user by the MX (64-bit counter).
Unicast bytes in Total number of unicast bytes received from the user by the MX (64-bit counter).
Unicast packets out Total number of unicast packets sent by the MX to the user (64-bit counter).
Unicast bytes out Total number of unicast bytes sent by the MX to the user (64-bit counter).
Multicast packets in Total number of multicast packets received from the user by the MX (64-bit counter).
Multicast bytes in Total number of multicast bytes received from the user by the MX (64-bit counter).
Number of packets
with encryption errors
Total number of decryption failures.
Number of bytes with
encryption errors
Total number of bytes with decryption errors.
Last packet data rate Data transmit rate, in megabits per second (Mbps), of the last packet received by the MP
access point.
Last packet signal
strength
Signal strength, in decibels referred to 1 milliwatt (dBm), of the last packet received by the
MP access point.
Last packet data S/N
ratio
Signal-to-noise ratio of the last packet received by the MP access point.
Protocol Wireless protocol used.
Session CAC State of session-based Call Admission Control (CAC) on the SSID’s service profile.
Table 19– 6. show sessions network session-id Output (continued)
Field Description