Operation Manual

Session Management Commands
Mobility System Software Command Reference Guide
Version 7.3
19 – 458
IP or MAC Address IP address of the session user, or the user’s MAC address if the
user has not yet received an IP address.
VLAN Name Name of the VLAN associated with the session.
Port/Radio Number of the port and radio through which the user is
accessing this session.
Table 19– 5. Additional show sessions network verbose
Output
Field Description
Client MAC MAC address of the session user.
GID Global session ID, a unique session number within a Mobility Domain.
State Status of the session:
❑ AUTH, ASSOC REQ—Client is being associated by the 802.1X protocol.
❑ AUTH AND ASSOC—Client is being associated by the 802.1X protocol, and the user is being
authenticated.
❑ AUTHORIZING—User has been authenticated (for example, by the 802.1X protocol and an
AAA method), and is entering AAA authorization.
❑ AUTHORIZED—User has been authorized by an AAA method.
❑ ACTIVE—User’s AAA attributes have been applied, and the user is active on the network.
❑ DEASSOCIATED—One of the following:
• Wireless client has sent the MX switch a disassociate message.
• User associated with one of the current MX switch’s MP access points has appeared at
another MX switch in the Mobility Domain.
❑ ROAMING AWAY—The MX switch has been sent a request to transfer the user, who is
roaming, to another MX switch.
❑ STATUS UPDATED—MX switch is receiving a final update from an MP access point about the
user, who has roamed away.
❑ WEB_AUTHING—User is being authenticated by WebAAA.
❑ WIRED AUTH’ING—User is being authenticated by the 802.1X protocol on a wired
authentication port.
❑ KILLING—User’s session is being cleared, because of 802.1X authentication failure, entry of a
clear command, or some other event.
now on Shows the following information about the MP and radio the session is currently on:
❑ IP address and port number of the MX managing the MP
❑ Serial number and radio number of the MP
❑ Amount of time the session has been on this MP
from Shows information about the MPs from which the session has roamed. (See the descriptions above
for the now on field.)
Host name Host name of the user’s networking device.
Table 19– 4. show sessions network (summary) Output (continued)
Field Description