Operation Manual

Session Management Commands
Session Management Commands
19 – 453
See Also clear sessions on page 19-449
show sessions mesh-ap
Displays summary or verbose information about Mesh AP sessions on the MX.
Syntax show sessions mesh-ap [session-id session-id | verbose]
Defaults None.
Access All.
History Introduced in MSS Version 6.0.
Examples To view information about Mesh AP sessions, type the following command:
MX> show sessions mesh-ap
User Sess IP or MAC VLAN AP/
Name ID Address Name Radio
---------------------------- ---- ----------------- --------------- ---------
00:0b:0e:17:bb:3f 2* 1.1.1.3 (none) L AP 2/2
Table 19– 3 describes the fields of show sessions mesh-ap output.
Table 19– 2. show sessions telnet client Output
Field Description
Session Session number assigned by MSS when the client session is
established.
Server Address IP address of the remote device.
Server Port TCP port number of the remote device’s TCP server.
Client Port TCP port number MSS is using for the client side of the session.
session-id
local-session-id
Displays the specified Mesh AP session. To determine the local session ID for a
Mesh AP session, use the show sessions mesh-ap command without the
session-id option.
verbose Provides detailed output for all Mesh AP sessions.
Table 19– 3. show sessions mesh-ap Output
Field Description
User Name The MAC address of the authenticated Mesh AP.
Sess ID Locally unique number that identifies this session. An asterisk
(*) next to a session ID indicates that the session is fully
active.
IP or MAC Address IP address of the Mesh AP.
VLAN Name Name of the VLAN associated with the session.
Port/Radio Number of the port and radio through which the Mesh AP is
accessing this session.