Operation Manual

Port Commands
Port Commands
5 – 51
See Also show port counters on page 5-61
reset port
Resets a port by toggling the link state and Power over Ethernet (PoE) state.
Syntax reset port port-list
Defaults None.
Access Enabled.
collisions Single Coll Total number of frames transmitted that experienced one
collision before 64 bytes of the frame were transmitted on the
network.
Multiple Coll Total number of frames transmitted that experienced more
than one collision before 64 bytes of the frame were
transmitted on the network.
Excessive Coll Total number of frames that experienced more than 16
collisions during transmit attempts. These frames are
dropped and not transmitted.
Total Coll Best estimate of the total number of collisions on this
Ethernet segment.
receive-etherstats Rx 64 Number of packets received that were 64 bytes long.
Rx 127 Number of packets received that were from 65 through 127
bytes long.
Rx 255 Number of packets received that were from 128 through 255
bytes long.
Rx 511 Number of packets received that were from 256 through 511
bytes long.
Rx 1023 Number of packets received that were from 512 through 1023
bytes long.
Rx 1518 Number of packets received that were from 1024 through
1518 bytes long.
transmit-etherstats Tx 64 Number of packets transmitted that were 64 bytes long.
Tx 127 Number of packets transmitted that were from 65 through
127 bytes long.
Tx 255 Number of packets transmitted that were from 128 through
255 bytes long.
Tx 511 Number of packets transmitted that were from 256 through
511 bytes long.
Tx 1023 Number of packets transmitted that were from 512 through
1023 bytes long.
Tx 1518 Number of packets transmitted that were from 1024 through
1518 bytes long.
port-list List of physical ports. MSS resets all the specified ports.
Table 5– 5. Output for monitor port counters (continued)
Statistics Option Field Description