Operation Manual

802.1X Management Commands
802.1X Management Commands
18 – 447
Access Enabled.
History
Examples
Type the following command to set the WEP-rekey period to 300 seconds:
MX# set dot1x wep-rekey-period 300
success: dot1x wep-rekey-period set to 300
See Also
● set dot1x wep-rekey on page 18-446
● show dot1x on page 18-447
show dot1x
Displays 802.1X client information for statistics and configuration settings.
Syntax show dot1x {clients | stats | config}
Defaults None.
Access Enabled.
History
Examples
Type the following command to display the 802.1X clients:
MX# show dot1x clients
MAC Address State Vlan Identity
------------- ------- ------ ----------
00:20:a6:48:01:1f Connecting (unknown)
00:05:3c:07:6d:7c Authenticated vlan-it EXAMPLE\jose
00:05:5d:7e:94:83 Authenticated vlan-eng EXAMPLE\singh
00:02:2d:86:bd:38 Authenticated vlan-eng [e-mail]
00:05:5d:7e:97:b4 Authenticated vlan-eng EXAMPLE\havel
00:05:5d:7e:98:1a Authenticated vlan-eng EXAMPLE\nash
00:0b:be:a9:dc:4e Authenticated vlan-pm [e-mail]
00:05:5d:7e:96:e3 Authenticated vlan-eng EXAMPLE\mishan
MSS Version 1.0 Command introduced.
MSS Version 1.1 Maximum value changed.
clients Displays information about active 802.1X clients, including
client name, MAC address, and state.
stats Displays global 802.1X statistics associated with connecting
and authenticating.
config Displays a summary of the current configuration.
Version 1.0 Command introduced
Version 2.1 Bonded authentication information added to show dot1x config output:
❑ New flag added for Username field. If a user glob is configured for bonded
authentication, an asterisk appears after the user glob. For example:
[e-mail] !
❑ New field, Bonded period, added to 802.1X parameter column.
Version 3.1 Format of 802.1X authentication rule information in show dot1x config output
changed. The rules are still listed at the top of the display, but more information is
shown for each rule.