Operation Manual

802.1X Management Commands
Mobility System Software Command Reference Guide
Version 7.3
18 – 438
Access Enabled.
History Introduced in MSS 1.0.
Examples Type the following command to reset the default reauthentication time period:
MX# clear dot1x reauth-period
success: change accepted.
See Also
● set dot1x reauth-period on page 18-444
● show dot1x on page 18-447
clear dot1x timeout auth-server
Resets to the default setting the number of seconds that must elapse before the MX times out a
request to a RADIUS server.
Syntax clear dot1x timeout auth-server
Defaults The default is 30 seconds.
Access Enabled.
History Introduced in MSS 1.0.
Examples To reset the default timeout for requests to an authentication server, type the following
command:
MX# clear dot1x timeout auth-server
success: change accepted.
See Also
● set dot1x timeout auth-server on page 18-444
● show dot1x on page 18-447
clear dot1x timeout supplicant
Resets to the default setting the number of seconds that must elapse before an authentication
session with a supplicant (client) times out.
Syntax clear dot1x timeout supplicant
Defaults The default for the authentication timeout sessions is 30 seconds.
Access Enabled.
History Introduced in MSS 1.0.
Examples Type the following command to reset the timeout period for an authentication session:
MX# clear dot1x timeout supplicant
success: change accepted.
See Also
● set dot1x timeout supplicant on page 18-445
● show dot1x on page 18-447