Operation Manual

RADIUS, LDAP, and Server Groups Commands
RADIUS, LDAP, and Server Groups Commands
17 – 431
Access Enabled
History Introduced in MSS Version 7.0
set radius dac
Configure dyanmic RADIUS extensions in support of RFC 3576.
Syntax MX#set radius-dac name ip-addr key string [disconnect [enable|disable]
change-of-author[enable|disable] replay-protection [enable|disable] replay-window
seconds]
Defaults None
Access Enabled.
History Introduced in MSS Version 6.2.
For more information on configuring this feature, see the Mobility System Software Configuration
Guide.
set authorization dynamic
Configures SSIDs for dynamic RADIUS clients.
Syntax MX# set authorization dynamic {ssid [wireless_8021X |8021X |any |name]
| wired name}
Defaults None.
Access Enabled.
History Introduced in MSS Version 6.2.
Examples To configure an SSID named dac_clients, use the following command:
MX# set authorization dynamic ssid dac_clients
success:change accepted.
set radius das-port
Configures the dynamic authorization port for Dynamic RADIUS servers.
Syntax set radius das-port port_number
Defaults None
Access Enabled
History Introduced in MSS Version 6.2.
Examples
MX# set radius das-port 65539
sucess:change accepted
set radius client system-ip
Causes all RADIUS requests to be sourced from the IP address specified by the set system
ip-address command, providing a permanent source IP address for RADIUS packets sent from
the MX.