Operation Manual

RADIUS, LDAP, and Server Groups Commands
RADIUS, LDAP, and Server Groups Commands
17 – 425
See Also
● set radius client system-ip on page 431
● show aaa on page 190
clear radius proxy client
Removes RADIUS proxy client entries for third-party APs.
Syntax clear radius proxy client all
Defaults None.
Access Enabled.
History Introduced in MSS 4.0.
Examples The following command clears all RADIUS proxy client entries from the MX:
MX# clear radius proxy client all
success: change accepted.
See Also set radius proxy client on page 432
clear radius proxy port
Removes RADIUS proxy ports configured for third-party APs.
Syntax clear radius proxy port all
Defaults None.
Access Enabled.
History Introduced in MSS 4.0.
Examples The following command clears all RADIUS proxy port entries from the switch:
MX# clear radius proxy port all
success: change accepted.
See Also set radius proxy port on page 433
clear radius server
Removes the named RADIUS server from the MX configuration.
Syntax clear radius server server-name
Defaults None.
Access Enabled.
History Introduced in MSS 1.0.
Examples The following command removes the RADIUS server rs42 from a list of remote AAA
servers:
MX# clear radius server rs42
success: change accepted.
server-name Name of a RADIUS server configured to perform remote AAA services for the MX.