Operation Manual

RADIUS, LDAP, and Server Groups Commands
RADIUS, LDAP, and Server Groups Commands
17 – 423
Usage Clears the MAC address format from the LDAP configuration.
clear ldap timeout
Syntax clear ldap timeout secs
Defaults None
Access Enabled
History Introduced in MSS 7.1.
clear ldap server
Syntax clear ldap server name
Defaults None
Access Enabled
History Introduced in MSS 7.1.
clear ldap server group
Syntax clear ldap server group name
Defaults None
Access Enabled
History Introduced in MSS 7.1
clear radius
Resets parameters that were globally configured for RADIUS servers to the default values.
Syntax clear radius {deadtime | key | retransmit | timeout}
Defaults Global RADIUS parameters have the following default values:
● deadtime—0 (zero) minutes (The MX does not designate unresponsive RADIUS servers as
unavailable.)
● key—No key
● retransmit—3 (the total number of attempts, including the first attempt)
● timeout—5 seconds
Access Enabled.
History Introduced in MSS 1.0.
deadtime Number of minutes to wait after declaring an unresponsive RADIUS server
unavailable before retrying the RADIUS server.
key Password (shared secret key) used to authenticate to the RADIUS server.
retransmit Number of transmission attempts made before declaring an unresponsive RADIUS
server unavailable.
timeout Number of seconds to wait for the RADIUS server to respond before retransmitting.